Lass Enterprises Inc.Lass Enterprises Inc.
201 Grace Blvd.
Altamonte Springs, FL 32714
Phone (407) 682-6334
Fax (407) 682-2180
AVS-2
The AC Voltage Sensor is a pocket oriented device that detects and indicates the presence of AC voltage (50V to 1000V) without the need of making an electrical connection. There are no leads to hook up. Just hold the sensor tip on the spot to be tested, then press and hold the "Test" button.
This is a discontinued item. Only parts support is available.
BSE-1, BSP-1
Two versions of blade sharpeners for use on our pipe cutters our any straight knife blade. One is lower cost and uses steel cutters to create chisel grind edge on the blade. The other is a two stage sharpener using ceramic cutters to create a hollow grind edge.
BUB-1
The BUBBA is a multiport valve repair tool. It easily and safely compresses a multiport spring for disassembly and reassembly
CWP-1, CWP-2
The CWP-1 is a soft plastic cap that seals 3/8" chlorinator saddle-tee fittings. Locked in place by a standard compression nut. Fits the EZ Clor, Guardex and MA chlorinators
The CWP-2 is a soft plastic cap that seals 5/16" chlorinator saddle-tee fittings. Locked in place by a standard compression nut. Fits the Hayward CL220 chlorinators.
COP-2
The Clean-Out-Plug Wrench facilitate the installation and removal of those hard to reach clean-out plugs. It's thirty inches of length easily reach the bottom of skimmers, and main drain sumps. The wrench is designed to remove both 1 1/2" and 2" clean-out plugs.
The COP-2 has a 1 1/4" square shaft.
DG1-1
The Dura Grip I is a lid opening tool for the clear Lexan lint trap covers used on a large variety of swimming pool pumps including: Seablue BP series, Sta-Rite Dura Glas series, Sta-Rite Max-E-Glas series, and Sta-Rite HP/HPA series. Made of steel, the Dura Grip I also works as a skimmer basket remover and an equipment band tightening aid.
DG3-1
The Dura Grip III is a lid opening tool for over fourteen different equipment lids. Included are: the Hayward CL200, CL220, and Power-Flo Pumps; the Pac Fab Challenger, Pinnacle, and Dynamo pumps; the Life Guard Chlorinators; the Sta-Rite Dura-Glas, Max-E-Glas, and HP/HPA pumps; the Seablue BP and BPA pumps; the Sani King 910, and 930 chlorinators; the Swimquip pumps; and others. Made of molded PVC, the Dura Grip 3 is very rugged but does not damage the equipment lid.
DG4-1, DG4-2
Lass Enterprises, Inc.'s Dura Grip IV is an all purpose strap wrench that quickly and easily adjusts to fit any size or shape object up to 10 inches in diameter. The Dura Grip IV automatically locks the strap's position when torque is applied using the 8 1/2" handle - thus there is no need for the user to hold the strap while using the wrench. Manufactured of PVC (handle) and reinforced neoprene (strap), the Dura Grip IV is ideal for use in severe environments. The strap grips the object without scratching or marring its surface while the 8 1/2" handle allows for the application of plenty of torque to either loosen or tighten the object.
The Dura Grip IV has countless uses. Let your imagination expand the following list:
Pool & Spa uses - Jacuzzi and Premier/Springwater lint trap lids; Hayward, Lifeguard and Sani King chlorinator lids; Polaris, Pool Sweep, Jet Vac pump impellers; bronze pump impellers; portable spa cartridge filter bodies.
Plumbing uses - pipe unions, tub spouts, shower spouts.
Household uses - water filters, jar lids.
Automotive uses - oil filters, fluid caps, crank shafts.
EAL-2.0 / EAL-1.5 / EAL-1.0 / EAL-.75
The "best" way to repair PVC plumbing. Whenever a PVC fitting needs to be replaced, a small part of the pipe that is glued into it is lost. If there remains 1 ¼" or more pipe then the Extend-All™ Fitting is the best way to reconnect the system. The Extend-All™ Fitting is glued onto the end of the pipe making it just long enough to accept the new PVC fitting.
Advantages:
1) Zero restriction
2) Always fits right
3) Fits all schedules of PVC pipe
4) No Stress on pipe
5) Saves Time
Disadvantages:
1) Requires that 1 ¼" of pipe remains after old fitting is cut out.
NOTE: If less than 1 ¼" of pipe is available, the LASS Enterprises PIPE EXTENDER can be used to accomplish the repair.
ESW-1
The Eyeball Seat Wrench is designed to fit a wide variety of threaded 1 1/2" eyeball seats. When attached to your standard 3/8" drive ratchet wrench, the Eyeball Seat Wrench slides into the slots of the eyeball seat and allows you to provide balanced torque to the seat. This balanced torque allows you to unscrew the eyeball seat without damage to either the eyeball seat or the threaded fitting in the pool wall. The Eyeball Seat Wrench fits Hayward, Pac-Fab, American Products, Seablue & Purex Eyeballs.
FLW-1
When used in conjunction with our Cleanout Plug Wrench (COP-2) the Filter Lid Wrench makes it easy to remove and/or replace the threaded lids used on Seablue, Richardson and Baker Hydro sand filters.
The Filter Lid Wrench settles down on the respective filter lid and catches all of the stubs on the lid. The Cleanout Plug Wrench then is set into the notches on the top of the FLW-1 and allows the technician to apply adequate torque to remove or replace the lid.
Hint: Always lubricate the O-ring before trying to remove. We suggest squirting WD-40 into the O-ring area.
FEX-1.5, FEX-2.0
These extenders make any 1 1/2" or 2" schedule 40 fitting just a little longer. Great for 3 way valve replacements.
FLL-.75
Use this durable, economical lock to hold 5"x9" floats in place on a 3/4" braided rope.
TFP-1.5, TFP-2.0
Stops the flow of water while repairing a flooded plumbing system. Designed to temporarily seal off schedule 40 PVC pipe.
GHW-1
Made of a high quality polymer. Twelve washers per sheet.
GFB-1
A giant size bag that fits all powered vacuums and leaf eaters. This bag will pick up the finest of debris in the pool.
GLB-1
This bag will pick up over 1.5 bushels of leafs. A giant size bag that fits all powered vacuums and leaf eaters.
GLS-1
The Grate Lifting System enables the removal of both commercial and residential main drain grates from their associated frames. The aluminum "hook" is designed to fit all brands of main drain grates and can be utilized whether the pool is full or empty. The padded PVC lever bar is used to lift the grate when the pool is empty while a standard tele-pole can be used to reach and lift the grate if the pool is full.
utter Drain Extender
G
DE-1, GDG-1, GDK-1The
Gutter Drain Extender raises the top of a gutter drain to prepare the surrounding area for resurfacing.HCR-1
The Hose and Cord Reel stores either backwash hose or electric cords quickly, neatly, and safely. Made of rugged plastic construction it reels and unreels its full length in seconds. It stores either 85 feet of 1.5" or 2" backwash hose, or 100 feet of extension cord. Great for your service truck, in-store operations, and even on construction sites.
HVW-1
Functions as a "Special Socket" to adapt our CLEAN-OUT-PLUG WRENCH (COP-2) to the Hayward Hydrostatic Valve.
IDL-1B, IDL-1R, IDL-2B and IDL-2R
Identification Labels for plumbing and equipment. They are sun resistant and printed in red or black ink. Made from a laminate coated vinyl with a permanent adhesive for long life. Two sets to choose from.
Inside Coupling/Reducing Bushing
ISC-1.0 / ISC-1.5 / ISC-2.0 / ISC-3.0 / ISC-4.0
Available in sizes 1", 1 1/2", 2", 3", and 4".
Couples two schedule forty pipes together by gluing to the inside of both pieces of pipe. Results in glued joint with no increase in outside diameter at the joint. A life saver in tight spots where pipes are stacked tight together.
The three inch and four inch unit doubles as either an inside coupling or a reducing bushing. The four inch fits inside four inch schedule forty pipe on both ends. It can also be used as a three inch outside coupling on both ends and therefore as a four inch inside to three inch outside reducing bushing.
The three inch performs a similar function with three inch and two inch schedule forty pipe. Note: the one and one half inch and two inch do not have a reducing capability.
These fittings are particularly useful in the repair of tight, multi-pipe plumbing areas.
IPC-1 / IPC-4
The Inside Pipe Cutters reach inside a schedule 40 PVC pipe and cuts it off squarely and smoothly at the selected distance
from the end of the pipe. The IPC-1 model is designed to cut from 1 1/4" schedule 40 PVC pipe up to 2" schedule 40 PVC pipe. the IPC-4 model is designed to cut from 2" schedule 40 & 80 PVC to 8" schedule 40 & 80 PVC pipe.
Inside Pipe Cutter Blades
IPC-2 / IPC-3 / IPC-5 / IPC-6
The IPC-2 is a replacement for the blade that is supplied as part of the IPC-1 inside pipe cutter.
The IPC-3 is a smaller blade available for the IPC-1 inside pipe cutter that expands its range to include 1" and 3/4" schedule 40 PVC pipes.
The IPC-5 and IPC-6 are replacement blades for the IPC-4 inside pipe cutter. The IPC-6 is for cutting 2 inch pipes while the IPC-5 is for cutting larger pipe sizes.
JPN-1
This durable, plastic nozzle produces a strong, concentrated jet of water that blasts dirt and grime away. Yet it is quickly and easily adjustable from a jet to a diffused spray, a dribble, or a complete shut off. Great for cleaning filter cartridges and grids, decks, driveways, etc.
KNB-1
A Multi-Function 10 Micron Bag. Used to final filter fill water, polish pool water, and collect backwash debris.
KPC-1, KPC-2
A pocket size cutter for poly tubing, poly pipe and rubber hose up to 1 1/2 inch. Also cuts PVC up to 1 1/4 inch.
KRC , KRE, KRT Series
Permanent One-Piece PVC Line Repair and Fitting Replacement
LED-1
The Leak Detector permits the pool technician to accurately release dye immediately adjacent to the suspected leak without introducing troublesome turbulence. The Leak Detector works effectively anywhere in the pool - the skimmer, skimmer mouth, tile line, around return fittings, light, and even the main drain. The Leak Detector works in concrete, vinyl, and fiberglass pools.
MPW-1
This wrench is great for removing all sorts of different pipe plugs and threaded adapters.
MT-100, MT-101, MT-301, MT-770
Attach this socket to your electric drill and open many different filters and pumps quickly and easily.
LPC-1, LPC-2
Cuts PVC pipe smooth and clean with minimal effort. Works on PVC and polyethylene pipe up to 2" diameter.
PEX-.50 / PEX-.75 / PEX-1.0 / PEX-1.2 / PEX-1.5 / PEX-2.0 / PEX-2.5 / PEX-3.0 / PEX-4.0
Available in sizes 1/2", 3/4", 1", 1 1/4", 1 1/2",
2", 2 1/2", 3", and 4".
The Pipe Extender allows servicemen
to save expensive valves and valuable time when repairing plumbing where the fittings are very close to each other. One end of the pipe Extender glues inside SCH 40 PVC pipe. The other end glues into a new fitting. When installed, the pipe Extender cannot be seen. Flow restriction is insignificant (about like adding one more elbow to the system).
QUC-1 / QUC-2
QuikClean is a handy grease and grime remover that is no further away than your tool box. Available in both 1oz. and 2oz. sizes, this product quickly cleans dirty O rings, O ring grooves, bands, and what ever you have that needs cleaning. Also, great for preventing O ring buckle when tightening O ring clamps.
Both the QUC-1 (1oz.) and the QUC-2 (2oz.) are provided with a tool box compatible flip top dispensing cap so that it is very convenient to use - no cap to un-screw and a small easily directed stream of cleaner.
RFE-1.5W, RFE-1.5B
Put this escution behind a return fitting to dress up a ruff edge.
RLC-1
This check valve threads into a standard 1 1/2" return line for a pool or spa. It does a great job when multiple water levels are being fed from one return system.
RPE-1.5
The Return Plumbing Extender enables the 1 1/2" threaded female fitting in the pool wall to be extended 3/4" to 1". Ideal when pool is being resurfaced.
STE-.75, STE-1.0, STE-1.2
A superior saddle tee for polyethylene pipe.
SVS-1
The Sand Vac will empty a sand filter containing 250lbs. of sand in less than 15 minutes. Using a combination of siphon and venturi action the SVS-1 will take the sand and water from the filter and put it in a bucket sitting beside the filter, or spread it around on the ground near the filter. There are no moving parts to wear out. The Sand Vac System is powered by any standard house water system operating above 30 psi via a standard 5/8" or larger garden hose.
SCV-1.5
This swing check valve affords a unique advantage of being able to open and clean / service the valve without cutting any plumbing. The clear lid gives a real time indication of what is happening inside the valve.
SKS-Series
Attach this to an electric drill and clean out the inside of a used schedule 40 PVC fitting. Great for rescuing backwash valve and other socket style valves and fittings.
SBG-1
Dual purpose adapter for stain, spot and black algae removal. The Stain-Be-Gon makes it possible to easily remove those unsightly surface stains and spots that appear on the walls and floor of concrete pools. No need to get into the water and no need to drain the pool.
For stains and spots clamp a 1 3/4" square pumice stone (made by U.S. Pumice) into the Stain-Be-Gon and attach to the pool cleaning pole. Rub the spot gently and it disappears. Great for removing bobby pin stains, B-B stains, fertilizer stains, Etc..
For black algae clamp a tri-clor stick or three-inch tablet into the Stain-Be-Gon. This allows the technician to coat each black algae spot with tri-clor without entering the pool. When there are only a few black algae spots on the pool, repeated coating of each spot is an effective way of killing the black algae.
THS-1, THS-2
The 1 1/2" Thread Shield is easily inserted into the 1 1/2" female adapters or vacuum fittings normally used for the standard return fitting. Once inserted, the threads are semi-sealed so as to prevent contamination of the threads from any outside source. Once the pool is filled with water, the Thread Shield are easily removed so that return fitting can be re-installed in the clean threads of the female adapter. Thread Shields are effective protection while gunniting, sand blasting, plastering, painting, fiber glassing, and all major refurbishing projects.
TGP-4.5
These pliers are a must for every pool tech's
tool box. At just 4.5 inches long they get into those tight little places.
Ultimate Spa Brush
USB-1
The Ultimate Spa Brush clips into the standard cleaning pole and makes brushing any spa quick and easy. Its hemispherical shape adapts to the shape of the spa so that there are no missed curves or corners. Yet it is stiff enough to remove the dirt and debris from the surfaces.
Also the Ultimate Spa Brush doubles as a great cobweb remover in those high, hard to reach areas such as screen enclosures, roof overhangs, soffits, and high ceiling living rooms.
VSB-1, VSB-2, VSB-3
The patented Vented Skimmer Basket solves three potentially serious problems for the swimming pool owner - - by providing an above water handle that also serves to prevent skimmer blockage caused by a full basket of debris.
XXX-1
A specialty vac head for those tough spots like;
catch troughs, big "clumps" of leaves, acorns, stones, and spas. Great for
the quick touch ups.
Water Lube
Water Lube is scientifically designed to lubricate and protect all material exposed to water, moisture, steam and pool chemical, within the temperature range of 0 F to over 100 F. Supplied in jars containing 1 3/4 oz. of Water Lube, this product is both tool box and work bench compatible. Also stores conveniently near pool equipment so it is handy when needed.
WST-1, WSF-1, WSL-1
These saws cut PVC pipe in tight corners like no other saw can. Choose the handle most comfortable for you and the application.
Consolidated Hardware System
Lass Enterprises, Inc., has developed a consolidated hardware system that is CROSS REFERENCED and REVERSE CROSS REFERENCED. This system combines the hardware used by the major pool and spa equipment manufacturers into a universal number system for easy ordering and easy delivery to your customer. Our Consolidated Hardware System allows you to eliminate duplicate inventory while reducing your costs in many ways. All of the hardware supplied by LASS Enterprises, Inc. equals or exceeds the quality of the equipment manufacturer's original hardware. Please call for more information.