ReNew Kit Choices

Three Net Types for the Pro-Lite frame:

Standard--With a large flexible blue net designed to hold in the maximum manageable load. Rounded corners for quicker, easier turns without load shift. Triple stitched for stronger net wear.

Tuff Duty--With a larger, tougher black net for heavy duty pickup.

Silt--With a superfine white net, tapered to hold in the finest debris. An extra bottom panel (standard blue) reduces wear from dragging on the bottom.

Quick and Easy Installation
Standard, Tuff Duty and Silt ReNew Kits

1. Remove old plastic rim and net
2. Place new net around metal frame
3. Secure net with holding clips (provided), attach one clip on front of metal frame and one clip behind each side seam
4. Install new plastic rim

Note: For Silt Net
Fold back of silt net (single white panel) into three layers for secure installation. Place over metal rim then install plastic side rim sections.

Detailed Instructions:

1. To remove old plastic rim and net, push up rim from outside with thumbs and/or screwdriver and pull off of metal frame.
2. Place new net through inside of metal frame and fold edge over. Secure net with three plastic holding clips (provided) to make installation easier. Attach one clip on front of metal frame and one clip behind each side seam. Align seams equally on both sides.
3. Starting at one side seam, force the leading edge section of plastic rim onto metal frame as far as possible by squeezing with hands.
4. If necessary, place scoop face down on hard surface and carefully hit exposed metal frame with hammer (or press with foot) until plastic rim is completely on.
5. Follow the same procedure for the side sections of plastic rim. Start from the side seam and move toward handle.

   These items are not available for purchase online.   Please call us for more information.