The Extend-All™ Fitting is the most reliable way to repair PVC plumbing when replacing a fitting. It is glued onto the remaining pipe to restore the proper length, ensuring the new fitting fits perfectly. Advantages: Zero restriction to water flow Always fits right Compatible with all PVC schedules No stress on the pipe Saves time on repairs Requirement: At least 1¼" of pipe must remain after the old fitting is removed. Note: If less than 1¼" of pipe is available, use the LASS Enterprises Pipe Extender to complete the repair. A simple, precise, and efficient solution for restoring PVC plumbing without guesswork or compromise.
Available in 3/4”, 1.0”, 1.5” and 2.0”
Zero flow restriction for optimal performance Fits over many standard fittings for versatile use 2" version works with most 3-way valves, saving time and materials during repairs A simple, reliable solution for extending PVC plumbing and preserving existing system components. FEX-1.5 Small End Fits in - standard 2" fitting Fits over - 1 1/2" pipe Large End Fits over - over many 1 1/2" fittings
FEX-2.0 Small End Fits in - standard 2" fiting
Fits over - 1 1/2" pipe
Large End Fits over - many 2" fittings and most three way valves
FEX-2.2 Small End Fits over - 2" pipe
Large End Fits over - many 2" fittings
FEX-2.5 Small End Fits over - 2 1/2" pipe
Large End Fits over - many 2 1/2" fittings
FKP-1
Repairs a leak less than 4″ into fitting
Use with 1 1/2″ plumbing or ask about our 2″ conversion extension
Comes with a custom beauty ring “eyeball” cap
FKP-2/FKP-3
Repairs a leak less than 14″ into fitting
Length of the 14″ Senior may be customized
Use with 1 1/2″ plumbing or ask about our 2″ conversion extension
Comes with a custom beauty ring “eyeball” cap
Also available for non-straight pipe, and Frankenplug straight pipe in 3″, 4″ & Polaris
Stops water flow during plumbing repairs with ease. Seals schedule 40 PVC temporarily Easily removed after repairs are complete Tested to hold against four feet of static water head Ideal for quick, reliable pool and plumbing maintenance without draining the system Insert the round side of the FLOOD PLUG into the flooded pipe. Slip new fittings and pipe sections over the 2-foot long tail. Glue the new pieces in place—avoid getting glue on the tail. Once the repair is complete, pull the tail to remove the plug; it easily passes through 90° elbows, 45° elbows, tees, male adapters, and straight pipe. A fast, efficient solution for in-line PVC pipe repairs without draining the system.
Available in 1 1/2” and 2”
Cut PVC pipe squarely and smoothly, from the inside. Saves time and money by making precise cuts quickly Replacement blades available for continued use Durable, efficient, and designed for hard-to-reach areas.
Cutters:
IPC-1: Cuts 1¼" to 2" pipe (optional blade available for 1" pipe)
IPC-4: Cuts 4”” to 6” pipe
IPC-7: With a handle for added stability, it can cut 1¼" to 2" pipe (optional blade available for 1" pipe)
Blades:
IPC-2: 1” Blade
IPC-3: 3/4” Blade
IPC-5: 2 1/2” Blade
IPC-6: 1 1/2” Blade
A simple, one-fitting solution for in-line PVC installations and repairs. The sliding sleeve design allows primer and solvent cement to be applied without bending the pipe—eliminating the need for long trenches or forcing pipe flex to fit standard couplings and tees.
Features:
Permanent, reliable solvent-weld seal — no O-rings required
No thrust blocking or staking needed
Ideal for tight repair areas
No special installation tools required
Also available in tees from ½” to 2”
Made in the USA
Designed to save time, labor, and unnecessary excavation while delivering a strong, long-lasting repair.
A simple, one-fitting solution for in-line PVC installations and repairs. The sliding sleeve design allows primer and solvent cement to be applied without bending the pipe—eliminating the need for long trenches or forcing pipe flex to fit standard couplings and tees.
Features:
Permanent, reliable solvent-weld seal — no O-rings required
No thrust blocking or staking needed
Ideal for tight repair areas
No special installation tools required
Also available in couplings from ½” to 4”
Made in the USA
Designed to save time, labor, and unnecessary excavation while delivering a strong, long-lasting repair.
Perfect for pools undergoing resurfacing, this extender lengthens in-the-wall to accommodate the added surface thickness. Made from white PVC for durability and a clean, professional finish.
RPE-1.5S: Extends 1½" flush mount eyeball fittings by ¾" to 1", providing the extra reach needed for resurfaced pools or precise alignment. Easy to install and made for durable, long-lasting performance.
RPE-1.5F: Extends 1½" flush mount eyeball fittings by ¾" to 1", providing the extra reach needed for resurfaced pools or precise alignment. Easy to install and made for durable, long-lasting performance.
RPE-1.5T: Extends 1 1/2” trim mount eyeball fittings by 3/4”-1” making it ideal for resurfacing pool. Durable, easy to install, and ensure proper alignment and fit.
Quickly stop leaks at pipe-to-fitting joints with this easy-to-use Snap Fitting. Instructions: Relieve pressure from the leaking joint. Apply PVC glue to the inside of the Snap Fitting and the leaking area of the pipe-to-fitting joint. Snap the fitting over the leak, centering it properly. Allow the glue to dry completely before pressurizing the joint. A fast, reliable solution for permanent leak repairs without replacing the entire fitting.
Available in 3/4”, 1”, 1.5”, 2”, 3”, and 4:.
No results match your search. Try removing a few filters.
