Aqua Locks® Patented Concrete Crack Repair Kit Repair and reinforce concrete cracks with our heavy-duty staple system designed for long-lasting structural support. Each kit includes high-strength steel staples and a two-part epoxy for secure bonding and dependable performance. Manufactured using 1018 cold rolled steel, with B7 grade threaded pins, rods, and tensioning bolts. The threaded design meets structural engineering requirements for use with two-part epoxy and helps create a strong mechanical bond within the concrete. Every kit includes epoxy and alignment templates to ensure accurate placement and easy installation. The threaded pins are designed to maximize grip within the concrete and epoxy for enhanced holding power.
Mixed Kit Includes:
5 – 8” concrete staples
5 – 4” concrete staples
Two-part epoxy
Installation templates
Large Kit Includes:
10 - 12” concrete staples
Two part epoxy
Installation templates
The CWP soft-plastic cap is designed to securely seal chlorinator saddle-tee fittings. It locks in place with a standard compression nut, providing a reliable, leak-free fit.
CWP-1: A durable soft-plastic cap designed to seal 3/8" chlorinator saddle-tee fittings. Secured with a standard compression nut, it provides a reliable, leak-free fit. Compatible with EZ Clor, Guardex, and MA chlorinators.
CWP-2: A is a soft-plastic cap that securely seals 5/16" chlorinator saddle-tee fittings. It locks in place with a standard compression nut and is compatible with Hayward CL220 chlorinators.
The Dura Grip series helps with a wide range of lids
The Dura Grip I: Makes removing clear Lexan lint trap covers quick and easy on a wide range of pool pumps, including Seablue BP series, Sta-Rite Dura-Glas, Max-E-Glas, and HP/HPA series. Made of durable steel, making it a versatile addition to any pool service toolkit.
The Dura Grip III: Made of tough molded PVC for a long use life, it fits a wide variety of equipment lids making removal of stubborn lids easy! Gives extra leverage in spite of plumbing obstacles.
Dura Grip IV: The all purpose strap wrench automatically locks the strap as torque is applied, and can wrap around anything up to 10” in diameter. The non-corrosive construction promotes a long life span. The 8 1/2” hand provides enough torque to tighten or loosen even the most stubborn lid.
Pool and Spa use: Impellers, spa filters, lint trap covers, chlorinator tops and plumbing unions.
Plumbing and Irrigation use: Tub spouts, pipe unions, shower spouts.
Household use: water filters and jar lids
Automotive use: oil filters and fluid caps
Stabilize pool equipment quickly and securely—no replumbing required. Made from long-lasting plastic, these stackable supports allow you to adjust total height as needed. Available in 2 sizes:
Small Dimensions: 3 1/8" L × 1 3/16" W × 1/2" H
Large Dimensions: 4 3/8”L x 1 2/16” W x 5/8” H
Versatile, and perfect for keeping your equipment level and stable.
The Extend-All™ Fitting is the most reliable way to repair PVC plumbing when replacing a fitting. It is glued onto the remaining pipe to restore the proper length, ensuring the new fitting fits perfectly. Advantages: Zero restriction to water flow Always fits right Compatible with all PVC schedules No stress on the pipe Saves time on repairs Requirement: At least 1¼" of pipe must remain after the old fitting is removed. Note: If less than 1¼" of pipe is available, use the LASS Enterprises Pipe Extender to complete the repair. A simple, precise, and efficient solution for restoring PVC plumbing without guesswork or compromise.
Available in 3/4”, 1.0”, 1.5” and 2.0”
The Eyeball Seat Wrench is designed to fit a wide range of 1½" threaded eyeball seats. Simply slide the wrench into the seat’s slots to apply balanced torque, making it easy to unscrew the seat without damaging the eyeball or the pool wall fitting. Durable, precise, and essential for safe pool maintenance.
ESW-1: Rugged PVC construction. Attach to 1/2’ ratchet for added torque
ESW-2: Machined from a solid block of aluminum, this wrench will remove eyeball with ease. Including flush eyeballs!
ESW-3: Machine from a solid block of aluminum, this wrench aids in removing stuck eyeball. (Will not remove flush eyeballs).
Zero flow restriction for optimal performance Fits over many standard fittings for versatile use 2" version works with most 3-way valves, saving time and materials during repairs A simple, reliable solution for extending PVC plumbing and preserving existing system components. FEX-1.5 Small End Fits in - standard 2" fitting Fits over - 1 1/2" pipe Large End Fits over - over many 1 1/2" fittings
FEX-2.0 Small End Fits in - standard 2" fiting
Fits over - 1 1/2" pipe
Large End Fits over - many 2" fittings and most three way valves
FEX-2.2 Small End Fits over - 2" pipe
Large End Fits over - many 2" fittings
FEX-2.5 Small End Fits over - 2 1/2" pipe
Large End Fits over - many 2 1/2" fittings
Floor Inlet Extenders are invalueable when resurfacing swimming pools. They permanetaly attach to the top of two popular floor return fittings allowing the new surface to come flush to the extender floor return.
FIE-1: Extends Sta Rite model 08417 floor inlet fitting by ½”.
FIE-2: Extends Sta Rite model 08417 floor inlet fitting 7/8” to 1 1/4".
FIE-3: Extends Hayward model SP1425 floor inlet fitting by 3/4”.
FIE-4: Extends Hayward model SP1425 floor inlet fitting by ½”.
Floor Inlet Extenders are invalueable when resurfacing swimming pools. They permanetaly attach to the top of two popular floor return fittings allowing the new surface to come flush to the extender floor return.
FIK-1: Extends Sta Rite model 08417 floor inlet fitting by ½”. Adjust flow by adjusting the deflector plate. The FIE-1 is held in place with two stainless steel screws. (included).
Use a silicon adheseve between the FIE-1 and the orginal fitting for a permenant seal.
FIK-2: Extends Sta Rite model 08417 floor inlet fitting 7/8” to 1 1/4". Adjust flow by adjusting the deflector Plate. The FIE-2 is held in place with two stainless steel screws (included)
Use a silicon adheseve between the FIE-2 and the orginal fitting for a permenant seal.
FIK-3: Extends Hayward model SP1425 floor inlet fitting by 3/4”. Adjust flow by adjusting the deflector plate. The FIE-3 is glued in place with PVC glue.
FIK-4D: Extends Hayward model SP1425 floor inlet fitting by ½”. The FIE-4 is held in place with four stainless steel screws. (included).
Use a silicon adheseve between the FIE-4 and the orginal fitting for a permenant seal.
Designed for U3 Skimmers and Hayward 1070 & 1080 Series skimmers, this heavy-duty basket delivers dependable debris capture and long-lasting performance.
*Durable construction for reliable, everyday use Integrated handle for quick and easy removal
*Permits water flow even when basket is full of debris
*Above-water handle option keeps hands dry and away from debris
*Reduces stress on the basket Helps prevent pump cavitation when the basket is full *Easily installs on most existing skimmer baskets Built for convenience, safety, and improved pool system performance.
Stops water flow during plumbing repairs with ease. Seals schedule 40 PVC temporarily Easily removed after repairs are complete Tested to hold against four feet of static water head Ideal for quick, reliable pool and plumbing maintenance without draining the system Insert the round side of the FLOOD PLUG into the flooded pipe. Slip new fittings and pipe sections over the 2-foot long tail. Glue the new pieces in place—avoid getting glue on the tail. Once the repair is complete, pull the tail to remove the plug; it easily passes through 90° elbows, 45° elbows, tees, male adapters, and straight pipe. A fast, efficient solution for in-line PVC pipe repairs without draining the system.
Available in 1 1/2” and 2”
FKP-1
Repairs a leak less than 4″ into fitting
Use with 1 1/2″ plumbing or ask about our 2″ conversion extension
Comes with a custom beauty ring “eyeball” cap
FKP-2/FKP-3
Repairs a leak less than 14″ into fitting
Length of the 14″ Senior may be customized
Use with 1 1/2″ plumbing or ask about our 2″ conversion extension
Comes with a custom beauty ring “eyeball” cap
Also available for non-straight pipe, and Frankenplug straight pipe in 3″, 4″ & Polaris
The GDE-1 (White) is a frame-only extension that adds ½" to a standard 2" x 4" gutter drain. Made from durable ABS, it holds itself in place while glue or silicone dries and accepts a standard 2" x 4" grate. Simple, reliable, and built for long-lasting performance.
Stackable if more height is needed.
GDG-1 (White) is a 2" x 4" replacement grate for standard gutter drains. Durable and easy to install, it provides a reliable cover for your gutter drain system.
The GDK-1 (White) includes everything you need for a complete gutter drain setup: a durable gutter drain frame, a matching 2" x 4" grate, and two stainless steel screws for secure installation. Assembled built to last.
The GDE-2 (Black) is a frame-only extension that adds ½" to a standard 2" x 4" gutter drain. Made from durable white ABS, it holds itself in place while glue or silicone dries and accepts a standard 2" x 4" grate. Simple, reliable, and built for long-lasting performance.
Stackable if more height is needed.
The GDG-2 (Black) is a 2" x 4" replacement grate for standard gutter drains. Durable and easy to install, it provides a reliable cover for your gutter drain system.
The GDK-2 (Black) includes everything you need for a complete gutter drain setup: a durable gutter drain frame, a matching 2" x 4" grate, and two stainless steel screws for secure installation. Assembled and built to last.
The GDE-6 (White) is a frame-only extension that adds 1/4" to a standard 2" x 6" gutter drain. Made from durable white ABS, it holds itself in place while glue or silicone dries and accepts a standard 2" x 6" grate. Simple, reliable, and built for long-lasting performance. Stackable if more height is needed.
The GDG-6 (White) is a 2" x 6" replacement grate for standard gutter drains. Built for durability and easy installation, it provides a secure and reliable cover for your gutter drain system.
The GDK-6 (White) is a 2" x 6" includes everything you need for a complete gutter drain setup: a durable gutter drain frame, a matching 2" x 6" grate, and two stainless steel screws for secure installation. Assembled and built to last.
Keep your pool systems organized and easy to understand with these durable ID labels. *Sun-resistant black ink on laminate-coated vinyl for long-lasting use
*Permanent adhesive with 3/8” high letters
*Single sheet covers multiple pools Words precut for easy application
*Dual-purpose: Construction crews: prevent confusion during installation Consumers: help new pool owners understand their system
*Available in 6 English versions and 1 Spanish version with English subtitles
Durable, clear, and easy to apply—perfect for any pool setup.
***Note: IDL-1 and IDL-2 available in red ink***
Cut PVC pipe squarely and smoothly, from the inside. Saves time and money by making precise cuts quickly Replacement blades available for continued use Durable, efficient, and designed for hard-to-reach areas.
Cutters:
IPC-1: Cuts 1¼" to 2" pipe (optional blade available for 1" pipe)
IPC-4: Cuts 4”” to 6” pipe
IPC-7: With a handle for added stability, it can cut 1¼" to 2" pipe (optional blade available for 1" pipe)
Blades:
IPC-2: 1” Blade
IPC-3: 3/4” Blade
IPC-5: 2 1/2” Blade
IPC-6: 1 1/2” Blade
A simple, one-fitting solution for in-line PVC installations and repairs. The sliding sleeve design allows primer and solvent cement to be applied without bending the pipe—eliminating the need for long trenches or forcing pipe flex to fit standard couplings and tees.
Features:
Permanent, reliable solvent-weld seal — no O-rings required
No thrust blocking or staking needed
Ideal for tight repair areas
No special installation tools required
Also available in tees from ½” to 2”
Made in the USA
Designed to save time, labor, and unnecessary excavation while delivering a strong, long-lasting repair.
A simple, one-fitting solution for in-line PVC installations and repairs. The sliding sleeve design allows primer and solvent cement to be applied without bending the pipe—eliminating the need for long trenches or forcing pipe flex to fit standard couplings and tees.
Features:
Permanent, reliable solvent-weld seal — no O-rings required
No thrust blocking or staking needed
Ideal for tight repair areas
No special installation tools required
Also available in couplings from ½” to 4”
Made in the USA
Designed to save time, labor, and unnecessary excavation while delivering a strong, long-lasting repair.
Easily connect to your pool pump’s bonding wire using this stainless steel bonding lug.
Installs directly in the pump strainer pot through the drain plug port. Patent pending by CMP.
This product meets NEC SECTION 680.26 (C) REQUIREMENTS, which requires that an intentional electric bond of a minimum conductive surface area of nine square inches be installed in contact with the above ground swimming pool water.
Easily remove debris from your impeller with the L-Pumper: Remove the trap cover and basket. Insert the L-Pumper facing the impeller mouth. Pump the handle up and down several times, finishing with an “up” stroke. Remove the L-Pumper from the trap. Rinse the L-Pumper starting with a “down” stroke to clear debris. Quick, simple, and effective for maintaining pump performance.
The Mini Bucket Test is a convenient, reusable tool that helps pool owners check for leaks quickly and accurately. Using your pool’s auto-fill system, simply fill the bucket and compare the water levels to determine whether water loss is due to evaporation or a potential leak — all without shutting off the pump.
This straightforward method eliminates complicated testing procedures and can be used again and again, making it a practical and cost-effective solution for ongoing leak detection.
The -100H “Hybrid” Socket is a versatile tool designed for residential, commercial, and industrial filter applications — earning its name as a true cross-over socket. Built on the philosophy of “One Durable Tool, Many Different Uses,” it handles a variety of fasteners across multiple sectors. (Hayward, Pentair, Waterway and more).
Slot End: Works on brass wing nuts used on some pool filters as well as commercial and industrial filter lids.
Hex End: Standard 3/4" socket fits clamping systems from manufacturers like Hayward, Pentair, Waterway, and more. Durable, efficient, and designed to simplify filter maintenance across multiple platforms.
Designed for LED technicians, the MT-1012 4-socket value pack ensures you have the right tools when you need them — no more “needed but didn’t buy” moments. Priced to save you money, it even includes the WW-1 tool for free, giving both a budget and practical advantage.
Plast-aid® is a versatile two-part compound made from a liquid and powder that transforms through a unique curing process. As it thickens, it progresses from a castable liquid to a glue, then putty, clay, and finally a hard, durable, waterproof plastic. This flexibility makes Plast-aid® ideal for casting into molds, repairing breaks, filling gaps, forming custom parts, and countless other applications. A must-have tool for repairs, fabrication, and creative projects. Plast-aid® transforms into a hard, durable, and waterproof plastic in just 15 minutes. Perfect for quick repairs, custom parts, and versatile applications where speed and strength matter.
Available is 2 convenient sizes:
1.5 oz for small jobs
6 oz for large jobs
Perfect for pools undergoing resurfacing, this extender lengthens in-the-wall to accommodate the added surface thickness. Made from white PVC for durability and a clean, professional finish.
RPE-1.5S: Extends 1½" flush mount eyeball fittings by ¾" to 1", providing the extra reach needed for resurfaced pools or precise alignment. Easy to install and made for durable, long-lasting performance.
RPE-1.5F: Extends 1½" flush mount eyeball fittings by ¾" to 1", providing the extra reach needed for resurfaced pools or precise alignment. Easy to install and made for durable, long-lasting performance.
RPE-1.5T: Extends 1 1/2” trim mount eyeball fittings by 3/4”-1” making it ideal for resurfacing pool. Durable, easy to install, and ensure proper alignment and fit.
The Sand Vac (SVS-1) empties up to 250 lbs. of sand from a filter in under 15 minutes. Using a combination of siphon and venturi action, it transfers sand and water to a bucket or disperses it nearby, with no moving parts to wear out. Powered by any standard house water system above 30 PSI via a 5/8" or larger garden hose Includes Sand Vac Head, a 4½-foot discharge hose, and a 9-foot discharge hose Fast, efficient, and durable solution for sand filter maintenance
Quickly stop leaks at pipe-to-fitting joints with this easy-to-use Snap Fitting. Instructions: Relieve pressure from the leaking joint. Apply PVC glue to the inside of the Snap Fitting and the leaking area of the pipe-to-fitting joint. Snap the fitting over the leak, centering it properly. Allow the glue to dry completely before pressurizing the joint. A fast, reliable solution for permanent leak repairs without replacing the entire fitting.
Available in 3/4”, 1”, 1.5”, 2”, 3”, and 4:.
The SQUEEGER now features a convenient roll-up handle and center clip, allowing the reel to neatly store up to 60 feet of drain hose.
Draining and storing your hose has never been easier — or cleaner. Simply slip the hose between the SQUEEGER’s wheels and roll to remove leftover water, leaving it flat and empty. Then secure the hose end under the center clip and use the handle to wind it up.
Clean. Organized. Effortless.
this tool addresses common challenges with certain spa and hot tub locking rings. Formed stainless steel construction for strength and durability
Laser-cut for precision fit
Makes removal and servicing of spa locking rings faster, safer, and more reliable
No results match your search. Try removing a few filters.
