Floor Inlet Extenders are invalueable when resurfacing swimming pools. They permanetaly attach to the top of two popular floor return fittings allowing the new surface to come flush to the extender floor return.
FIK-1: Extends Sta Rite model 08417 floor inlet fitting by ½”. Adjust flow by adjusting the deflector plate. The FIE-1 is held in place with two stainless steel screws. (included).
Use a silicon adheseve between the FIE-1 and the orginal fitting for a permenant seal.
FIK-2: Extends Sta Rite model 08417 floor inlet fitting 7/8” to 1 1/4". Adjust flow by adjusting the deflector Plate. The FIE-2 is held in place with two stainless steel screws (included)
Use a silicon adheseve between the FIE-2 and the orginal fitting for a permenant seal.
FIK-3: Extends Hayward model SP1425 floor inlet fitting by 3/4”. Adjust flow by adjusting the deflector plate. The FIE-3 is glued in place with PVC glue.
FIK-4D: Extends Hayward model SP1425 floor inlet fitting by ½”. The FIE-4 is held in place with four stainless steel screws. (included).
Use a silicon adheseve between the FIE-4 and the orginal fitting for a permenant seal.
Floor Inlet Extenders are invalueable when resurfacing swimming pools. They permanetaly attach to the top of two popular floor return fittings allowing the new surface to come flush to the extender floor return.
FIK-1: Extends Sta Rite model 08417 floor inlet fitting by ½”. Adjust flow by adjusting the deflector plate. The FIE-1 is held in place with two stainless steel screws. (included).
Use a silicon adheseve between the FIE-1 and the orginal fitting for a permenant seal.
FIK-2: Extends Sta Rite model 08417 floor inlet fitting 7/8” to 1 1/4". Adjust flow by adjusting the deflector Plate. The FIE-2 is held in place with two stainless steel screws (included)
Use a silicon adheseve between the FIE-2 and the orginal fitting for a permenant seal.
FIK-3: Extends Hayward model SP1425 floor inlet fitting by 3/4”. Adjust flow by adjusting the deflector plate. The FIE-3 is glued in place with PVC glue.
FIK-4D: Extends Hayward model SP1425 floor inlet fitting by ½”. The FIE-4 is held in place with four stainless steel screws. (included).
Use a silicon adheseve between the FIE-4 and the orginal fitting for a permenant seal.
